Coral EVA Foam Cycling Jersey — Holiday 2025
HTS Classification
Derived from the latest brand packet upload for this SKU.
Coral eva foam cycling jersey for the Holiday 2025 line. Shell fabric is chief weight eva foam (≥60%). Construction, trims, and intended use were reviewed against the binding rulings database and the brand's tech pack revision history.
Tariff rates by country of origin
U.S. landed duty for HTS 6203.42.4011.
MFN rate. No active FTA with the U.S.
MFN + Section 301 List 3 (+7.5%) currently in effect.
USMCA preferential — yarn-forward rule of origin met.
General Rules of Interpretation
Why HTS 6203.42.4011 was selected for this article.
- GRI 1Classification by heading text
The article is a cycling jersey of eva foam. The heading text of 6203 specifically describes garments of this construction and chief weight, satisfying GRI 1.
- GRI 3(b)Essential character — chief weight
Brand packet indicates EVA Foam represents ≥60% by weight of the shell fabric. Under Section XI Note 2(A), the garment is classified as if consisting wholly of that material, driving the knit construction (Chapter 61) classification.
- GRI 6Subheading selection
At the 8-digit level, the garment is "other" (not described by more specific subheadings such as bibs, overalls, or industrial). Statistical suffix selected based on gender/sizing per the brand tech pack.
Spec change opportunities
Potential duty savings if the following design adjustments are adopted — requires product development review.
Dropping cotton below 50% by weight moves the garment out of the cotton subheading and into the man-made-fiber subheading, which carries a lower MFN duty for this construction.
Section XI Note 2 to Chapter 61 distinguishes knits by stitch count per 2 cm. Falling below the threshold reclassifies the fabric and lowers the duty rate at the 8-digit subheading.
Outerwear that passes the AATCC 35 water-resistance test qualifies for the 'water resistant' subheading, which is duty-rated significantly lower than the standard 'other' subheading.
What-if scenario simulator
Model country of origin, fiber blend, and volume to project a duty outcome before locking specs.
Adjust the inputs and click Run scenario to model the duty outcome.